Ouellet ODS User Manual download pdf (Page 3)

180, 3

Avenue, L’ISLET, Quebec, G0R 2C0 CANADA

Tel.: (418) 247-3947, 1-800-463-7043 Fax: (418) 247-7801

www.ouellet.com

INSTRUCTIONS

For installation of the

Ceiling Fan-forced Diffuser “ODS Series”

ODSB Model Surface Mounting ( 7.5 to 10 kW)

IMPORTANT

MUST BE INSTALLED SOLIDLY

This heater could weight up to 35 lb (16 kg)

STANDARD CEILING MOUNTING

1. Never install the air-forced diffuser at less than 8 ft. (250 cm)

from the ﬂ oor and 12 in. (30 cm) from adjacent walls.

2. Provide an exit for the power supply wires in the ceiling,

under the heater.

3. Mount the ceiling support using provided screws.

For drop ceiling mounting, the necessary kit is not provided.

4. Suspend the heater at the hangers of the ceiling support.

5. Convey the wires of power supply to the junction box of

the heater and connect the heater leads to the supply leads

according to the local and national codes.

See wiring diagram.

6. Fold back the heater toward the ceiling and ﬁ x it using

the screw provided..

7. Install the front cover using provided screws (4).

OPTIONS

See installation pamphlet provided with the various options for

the installation of those options.

ATTENTION

Basic precautions should always be followed to reduce the risk

of ﬁ re, electric shock, and injury to persons.

- Read all instructions before using this heater.

- Do not use outdoors.

- Do not insert or allow foreign objects to enter any ventilation

or exhaust opening as this may cause an electric shock, ﬁ re,

or damage to the heater.

- Do not block air intakes or exhaust in any manner.

- Heater contains arcing and sparking parts. Do not use it

in areas where gasoline, paint, or ﬂ ammable liquids

are used or stored.

- Use this heater only as described in this manual. Any other

use not recommended by the manufacturer may cause ﬁ re,

electric shock, or injury to persons.

- Use copper wire only.

- The motor is thermally protected.

MAINTENANCE

- Once a year, remove the front cover and use a vacuum

cleaner or compressed air to remove the dust accumulation

inside the heater. Cleaning should be done while the heater is

disconnected from the power supply circuit.

- A qualiﬁ ed technician should perform any other servicing.

WARRANTY

OUELLET CANADA INC. warrants the electric heating

element of the ODSB Series for a ten (10) year period; and its

component parts against defects in material and workmanship

for a one (1) year period following the date of purchase, under

normal use and service, when proof of purchase of such is

provided to the manufacturer. The obligation of Ouellet Canada

Inc., under the terms of this warranty, will be to supply a new

unit and this omits the manufacturer to bear the installation

costs or other secondary charges linked to replacing the unit or

the component part(s).

IMPORTANT

Connect the control (thermostat or relay)

to the T1-T2 position on the terminal block.

Do not interrupt power supply to control this heater.

ODSB (7.5 to 10 kW)

KEEP THIS INSTRUCTION

FOR THE USER

INS85-200404-03

1 2 3

Comments to this Manuals

No comments

Ouellet ODS User Manual Page 3

Comments to this Manuals

Related products and manuals for Water boiler Ouellet ODS